Search Options

 
 

 

Multi Cut Fire Rescue Saw
Back to Top
Features :

TOOL-LESS GUARD/DEPTH® GAUGE
Provides maximum operator protection by covering all the cutting chain, but allows infinite depth-of-cut adjustments, from zero to eight inches deep, to prevent cutting rafters and supports. Tool-less design allows operator to install, adjust, or remove the Guard/Depth® Gauge quickly and easily, even with gloves on.

 

BULLET® Chain

The BULLET Chain is the first and only chain designed from the ground up specifically for fire department ventilation, forcible entry, and rescue operations. The BULLET Chain's patented cutter is a solid piece of metal without bends or groundout areas that cause weak points. The carbide insert is formulated specifically for fire department use. The sintered carbide insert creates a larger cutting surface and has a unique sheeting capability to reduce carbide breakage.

The raker gauge is shaped like the nose of a bullet and protects the carbide insert from impact. The gullet is very narrow to stop any possible "hooking", also reducing impact during cutting. Rather than cutting or slicing, the BULLET Chain actually files through a variety of materials. The Cutters Edge Fire Rescue Saw, equipped with the BULLET Chain, was tested for kickback by SMP, The Swedish Testing Institute. Because of the unique cutting action of the BULLET Chain, the test results showed it to have extremely low kickback, in fact, the lowest kickback potential of any chainsaw-style saw.

 

ONE-PIECE GUIDE BAR

Made from solid, steel alloy material with induction-hardened rails. A larger, integrated, sealed sprocket nose provides faster penetration, outstanding performance and longer life in the toughest cutting conditions. The thicker, one-piece construction cannot spread and eliminates failure due to misalignment.

 

CHAIN BRAKE

The chain brake stops the rotation of the chain in less than 1/20th of a second. It can be engaged or disengaged manually or, just like the seat belts in a car, the violent action of kickback will activate the inertia chain brake and stop the chain.

 

"SCRENCH TOOL" & TOOL HOLDER

Handy, universal tool that's used for all adjustment and maintenance of the Fire Rescue Saw.

 

FOUR-STAGE FILTRATION SYSTEM

Our externally mounted air filtration system has 211.4 square inches of surface area, enabling Cutters Edge Fire Rescue Saws to run up to 12 times longer than conventional chain saws in the hot, smoky fireground environment. The highly filtered, yet virtually unrestricted, air moves into the carburetor through a metered stack that straightens the airflow and develops a "ram air" effect to increase power.

 

TOOL-LESS CARBURETOR COMPARTMENT ENTRY

This tool-less opening feature allows fast and easy access for inspection and maintenance of the carburetor and spark plug, while easily snapping back into place.

 

CUTTERS EDGE ONE-STEP STARTING

This feature includes a momentary contact switch and a combined choke throttle lock to eliminate the possibility of flooding the engine. It takes only one simple step to start the saw.

 

MOMENTARY CONTACT SWITCH

Our momentary On/Off switch is always in the "On" position for reliable starting and to eliminate the possibility of flooding.

 

FUEL MIX AND BAR & CHAIN OIL TANKS

These large capacity tanks (Fuel mix: 26.8 oz, Bar & Chain Oil: 14.24 oz) are sized so the saw will run out of fuel mix before running out of bar & chain oil, to prevent the possibility of running the chain without proper lubrication.

 

FULL-WRAP HANDLE

and acts as a "chain catch" to provide additional protection from contact with the chain.

 

GUARD DEFLECTOR

The Guard Deflector redirects the airflow around the engine, keeping cutting residue away from the engine. This creates cooler running conditions for peak performance in any fire rescue environment.

 

COMBINED CHOKE THROTTLE LOCK WITH THROTTLE SAFETY GUARD

With one simple pull, the choke and throttle are set for fast, easy starts.  

 

COMPRESSION RELEASE

The Compression Release button reduces compression inside the engine for easier starting.

 

2-MASS ANTI-VIBRATION SYSTEM

The anti-vibration system isolates the handles from the vibration of the saw, stopping it from being transferred to the operator's hands. This reduces operator fatigue and increases safety.

Bullet Chain
Back to Top
Features :

 

The BULLET Chain is the first and only chain designed from the ground up specifically for fire department ventilation, forcible entry, and rescue operations.

 

The BULLET Chain's patented cutter is a solid piece of metal without bends or ground-out areas that cause weak points. The carbide insert is formulated specifically for fire department use. The sintered carbide insert creates a larger cutting surface and has a unique sheeting capability to reduce carbide breakage.

 

The raker gauge is shaped like the nose of a bullet and protects the carbide insert from impact. The gullet is very narrow to stop any possible "hooking," also reducing impact during cutting.
 

There are limitations, but your Cutters Edge Fire Rescue Saw with BULLET Chain will cut a wide variety of materials under the most severe fire ground and rescue scene conditions. BULLET Chain is capable of cutting most building materials, including roofing nails, joist hangers, nailing plates, flashing, light gauge sheet metal, and some lightweight concretes. It is also capable of cutting automotive sheet metal, automotive glass, hurricane glass, bulletproof glass, plastics, fiberglass, and many other composite materials. It can also cut aircraft skin, cockpit and aircraft windows, and some aircraft structural materials.

 

Rather than cutting or slicing, the BULLET Chain actually files through a variety of materials. It's the safest chain made today and it virtually eliminates kickback. According to certified test results performed in accordance with ISO 9518 by SMP, a Swedish Testing Institute, the BULLET Chain has kickback rotational energy up to 67 degrees less than standard chainsaw chain and is considered to be

 

"Extremely Low Kickback."

Not only is it the safest chain, but the BULLET Chain cuts a wider variety of materials than any other chain manufactured today.

Multi Cut Sawing Kit
Back to Top
Features :

Diamond Plate Aluminum Field Case
Operation, Maintenance Manuals
Warranty
(1) MULTI-CUT Fire Rescue Saw with BULLET Chain
Toll Kit – Including:

  • Grease Gun Grease Packet
  • (1) Air Filter
  • (1) Pre-wrap Filter
  • (1) Foam Filter Dressing
  • (1) 8 oz. 2-Cycle Oil (100:1)
  • Saw Sling – Carry Strap

(1) 1/4 Gallon Fuel Container
(1) BULLET Chain (Spare)
(2) Tree Cutting Chains
(3) Bar & Chain Oil

 

CE 101C Fire Rescue Concrete Chain Saw
Back to Top
Features :

The CE101C Gasoline-Powered Fire Rescue Concrete Chain Saw with SealPro™ Diamond Segmented Chain cuts reinforced concrete up to 14 inches thick. No power pack and no hydraulic lines are required. Only one water line is necessary to lubricate and cool the chain and eliminate any concrete dust. A 2 gpm (7.5 liters/min) flow of water at 20 psi (1.5 bar) is all that is needed. In many cases a standard residential hose can supply all the water necessary. Water can also be supplied by any water source, including fire hydrants, engines, and tenders. We also offer a complete Concrete Sawing Kit which includes a pump and all accessories necessary to supply water for cutting.

The CE101C cuts a wide range of materials, including reinforced concrete (rebar), masonry brick, concrete block, natural stone, and abrasive concrete. We developed a powerful 6.2 cu. inch (101cc) engine specifically for concrete cutting. An advanced crankshaft sealing, sealed throttle shaft, waterproof ignition, and a special air filtration system are just some of the features that allow this internal combustion engine to operate in the hostile and wet rescue concrete cutting environment.

Seal Pro Diamond Chain
Back to Top
Features :

Our GCP Premium SealPro Diamond Chain has the largest diamond segment available for a gasoline powered concrete chain saw and cuts reinforced concrete up to 16" thick.

The chain is laser welded and produces no kickback. In addition, micro-sized O-rings create a totally sealed rivet joint to keep out sand and slurry during concrete cutting. This unique design results in longer chain life, reducing chain stretch and tensioning adjustments by up to 50%, and reduces water requirements to only 20 psi (1.5 bar) pressure and 2 gpm (7.5 liters/min) flow.

Concrete Sawing Kit
Back to Top
Features :
 

Our rugged 24-piece CECSK Concrete Sawing Kit includes all of the tools you'll need to cut concrete anywhere, using any available water source. 

(1) Diamond plate aluminum case with removable engineer's trays and compartments that can be reconfigured
(1) CE101C12A or CE101C14A Gasoline Powered Concrete Cutting Chain Saw
(1) CE40100 pump
(1) 1-1/2" x 8 ft. suction hose
(1) 1-1/2" check valve
(1) hand priming pump
(1) 1-1/2" thread protector (npsh)
(1) 1-1/2" (npsh) female x 3/4" (ght) male adapter/thread protector
(1) 1-1/2" (npsh) female x 1-1/2" (nst) male adapter
(1) 3/4" x 3/4" FHT brass hose-to-hose connector
(1) 3/4" x 25 ft 250 psi Myti-flo woven hose
(1) 3/4" x 75 ft 250 psi Myti-flo woven hose
(1) 2-1/2" female x 3/4" (ght) male adapter
(1) 1-1/2" female x 3/4" (ght) male adapter
(1) 1" female x 3/4" (ght) male adapter
(1) hydrant wrench
(1) 1-1/4" gallon fuel container (UL approved)
(1) 3 gallon pressurize fuel container (UL approved)
(1) 8 oz. bottle, Cutters Edge 2-cycle oil mix (will make 6 gallons of fuel)
(1) air filter "recharger kit" (K&N filter cleaner and filter oil)
(1) can of WD-40 lubricant/water displacer
(1) tool kit
(1) pair of safety goggles
(1) pair of hearing protectors

Specifications subject to change without notice

CE735R Rotary Rescue Saw
Back to Top
Features :

CE735R Kit 12A

MULTI-CUT Rotary Rescue Saw with
12" Black Star Diamond Blade
12" Black Star Diamond Blade (Spare)
1.25 Gallon Fuel Container
8 oz. 2-Cycle Synthetic Oil Mix
3/4” x 75 ft. MYTI-FLO Woven Hose
Grease Gun
Grease Packet
Spark Plug (Spare)
Air Filter 735R (Spare)
Pre Filter 735R (Spare)
CE735R Drive Belt (Spare)
Water Kit
Complete Field Tool Kit
Diamond Plate Aluminum Case

CE735R Kit 14A

MULTI-CUT Rotary Rescue Saw with
14" Black Star Diamond Blade
14” Black Star Diamond Blade (Spare)
1.25 Gallon Fuel Container
8 oz. 2-Cycle Synthetic Oil Mix
3/4” x 75 ft. MYTI-FLO Woven Hose
Grease Gun
Grease Packet
Spark Plug (Spare)
Air Filter 735R (Spare)
Pre Filter 735R (Spare)
CE735R Drive Belt (Spare)
Water Kit
Complete Field Tool Kit
Diamond Plate Aluminum Case

Accessories  |  Blowers  |  Boots  |  Bunker Gear  |  Combination Tools  |  Communication Equipment  |  Coveralls & Flight Suits  |  Extrication Tools  |  Fire Extinguishers  |  Fire Hose  |  Foam & Foam Systems  |  Lifting Bags  |  Power Units Rope Rescue System  |  Saws  |  Tychem Products

GSA CONTRACT #GS-07F-0424M
Total Solutions for Law Enforcement, Security, Facility Management Systems, Fire, Rescue, Special Purpose Clothing, Marine Craft and Emergency/Disaster Responses

CCR Registered: Yes
CAGE: 1X6B6
TIN: 23-310-2296
DUNS: 107966017
PERIOD: Aug 1, 2007 through July 31 2012

 Contractor
911 Safety Equipment, LLC
329 East Main Street, Norristown, PA. 19401
Phone: (610) 279-6808 Fax: (610) 279-6806

Special Item Numbers (SIN’s)
     246-20(2)    465-11    465-19    465-22    567-99    633-30    633-30a