Search Options

 
 

Hand Portable Extinguishers
Methane Gas Detection
FAA Approved Halotron I Ext.
Wheeled Halon 1211 Ext.
Industrial Fire Suppression  
 
Clean Agent Pre-Engineered
Recharge Equipment
Extinguisher Brackets
Vehicle Systems
Small Engine Bus System
Restaurant Systems
 
ABC Multi-purpose
Back to Top
Features :
ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator. Available in Wheeled and Stationary extinguishers.
  • All Metal Valve Construction
  • Easy and more economical to maintain and service
  • U/L & U.S. Coast Guard Listed
  • Bar Coded and Bi-lingual Labels
Carbon Dioxide Stored Pressure Extinguishers
Back to Top
Features :

Carbon Dioxide is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.

  • All Metal Valve Construction
  • Meets many hospital medical equipment requirements
  • Independently test and approved for use in MRI facillities
  • Bar Coded and Bi-lingual Labels
Class D Dry Powder
Back to Top
Features :

FOR COMBUSTIBLE METAL FIRES

MODEL B570 contains a special blended Sodium Chloride based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium and sodium-potassium alloys can be successfully extinguished with this extinguisher.

There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher.

Available in 150 lb. Wheeled or Stationary

MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium.

Available in 250 lb. Wheeled

  • All Metal Valve Construction
  • Unique "soft flow" extension applicator
  • plus built in long range nozzle
  • Special corrosion resistant yellow
  • (Class D) color coded paint finish
  • F.M. listed
  • (TO ANSI/UL 299 and ANSI/UL 711)
  • Bar Coded and Bi-lingual Labels
Coast Guard Approved 2.5 Gallon AFFF Foam
Back to Top
Features :
Model 250CG AFFF Foam Extinguisher For use on Class A (ordinary combustibles) and B (Flammable liquid) fires. Features an easy and effective application using the hose and air aspirating nozzle. Has a unique capability to apply to flammable liquid spills to prevent ignition. Provides exceptional knock down and penetrating ability for use on deep seated Class A fires. Easier clean-up when compared with traditional dry chemical agents. Painted red and is U.S.C.G. approved when mounted using the 810CG bracket. Chrome plated brass valve body with stainless steel cylinder and handles offers superior corrosion protection when compared with most aluminum or standard mild steel cylinder extinguishers. Large diameter pull pin can be easily operated with gloves on. Schraeder valve on valve body allows for remote filling and charging with compressed air or nitrogen when using the Amerex 502 charge and potable water. Meets U.S.C.G. requirements for “Type A”, “Size II” and “Type B”, “Size II” extinguishers.
  • All Metal Valve Construction
  • Leaves no powder residue
  • Maximum visibility during discharge
  • Novice friendly, easy to understand instructions
  • Bar Coded Labels
Halon 121 Extinguishers
Back to Top
Features :
HALON 1211 is a liquified gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult to see and hard to reach areas and leaves no residue. It is recommended for protection of delicate, sensitive and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.

Quality industrial grade hardware, “CLEAN” agent, light weight, good discharge range and excellent fire extinguishing ability.
  • Rugged
  • Clean
  • Restored to Original Military Specification
  • User Friendly Bar Coded and Bi-lingual Labels
Halotron I "Clean Agent" Extinguishers
Back to Top
Features :

Note: 5 lb., 11 lb. and 15 1⁄2 lb. extinguishers are USCG approved with the bracket listed on the UL label.


HALOTRON I is a “Clean Agent” HydroChloroFluoroCarbon (HCFC) discharged as a rapidly evaporating liquid which leaves no residue. It effectively extinguishes Class A and B fires by cooling and smothering and it will not conduct electricity back to the operator. Halotron is pressurized with Argon gas and is an EPA and FAA approved agent suitable for use on Class A, B and C fires. It has a low GWP of 0.04 – 0.24, low ODP of 0.014 (twelve times lower than the EPA maximum allowable ODP of 0.20) and a low Atmospheric Lifetime (31⁄2 to 11 years). Halotron is intended for use in areas formerly protected by Halon 1211 hand portable extinguishers such as computer rooms, telecommunications facilities, clean rooms, data storage areas, offices (for protection of sensitive electronic equipment), boats and vehicles. ANODIZED ALUMINUM or CHROME PLATED BRASS VALVES WITH STAINLESS STEEL HANDLE/LEVER.

  • All metal construction
  • EPA approved "Clean Agent"
  • Most Widely used Halon 1211 replacement agent
  • Can be used for full training programs
  • Double-Strap mounting bracket
High Performance Dry Chemical
Back to Top
Features :

High Performance extinguishers are the ultimate choice in fire extinguishers for high hazard, frequent use and extreme environment applications. Economical – less initial cost, lower maintenance costs and greater reliability than cartridge operated extinguishers.

Available in 125 and 250lb. Wheeled and Stationary extinguishers. Hot dip galvanized USCG brackets available. 12 Year Warranty.

  • Superior Range (Vertical & Horizontal)
  • High (240 PSI) Operating Pressure
  • Choice of Chemicals (ABC Multi Purpose, Regular, Purple K)
  • Select: (High Flow Rate, Fast Discharge, Quicker Knockdown, More Operator Protection)
  • Select Compliance Flow for: (Long Range, Highest U.L. Ratings)
  • Painted Galvanized Drawn Steel Cylinders (The best corrosion protection available)
  • Protective Rubber Foot Rings (NO LONGER AVAILABLE)
  • All Metal Valve Construction
  • Gauge Guards
  • Bar Coded and Bi-lingual labels
Purple K Stored Pressure
Back to Top
Features :
PURPLE K extinguishers contain specially fluidized and siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries as the preferred fire fighting agent.
  • All Metal Valve Construction
  • Easy and more economical to maintain and service
  • Bar Coded and Bi-lingual Labels
  • 6 Year Warranty
Regular Dry Chemical Sodium Bicarbonate
Back to Top
Features :

REGULAR extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator.

  • All Metal Valve Construction
  • Easy and more economical to maintain and service
  • Bar Coded and Bi-lingual Labels
Water & Foam Stored Pressure
Back to Top
Features :

Model 240 utilizes the cooling, soaking and penetrating effect of a 45-55 ft. stream of WATER. The 50 sec. discharge time makes it very effective for inexperienced operators for use on Class A fires. Protect from freezing by adding the Model 506 Loaded Stream/Anti-freeze charge. In areas with a high level chloride content water it may be corrosion protected by using the Model 507 charge.

Model 254 AFFF FOAM unique 6 liter size fills many requirements for a lighter, more compact Class A:B extinguisher. Easy and effective application with the patented spray nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles.

Model 252 FFFP FOAM adds Class B fire fighting capability to the Class A effectiveness of this extinguisher. The Alcohol Resistant fire fighting agent is effective on fires in a wide variety of Class B materials such as alcohols, polar solvents, hydrocarbons and combinations such as gasohol. Apply to a non-ignited Class B liquid spill and it will seal the surface minimizing the chance of serious fire.

Model 250 AFFF FOAM Class A:B extinguisher. Easy and
effective application with air aspirated nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles.

  • All Metal Valve Construction
  • Leaves no powder residue
  • Maximum visibility during discharge
  • Novice friendly, easy to understand instructions
  • Bar Coded Labels
Water Mist "C" Rated Water Extinguishers
Back to Top
Features :

WATER MIST is the ultimate extinguisher for Class A fires and where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water making them the best extinguishers for protection of hospital environments, valuable books and documents, telecommunication facilities and “clean room” manufacturing facilities. The Amerex Water Mist extinguishers are easy to use, maintain, and service.

 

  • All Metal Valve Construction

  • Exclusive crevice free, butt welded cylinder

  • No O.D.P

  • No EPA

  • No global warming concerns

  • Non Magnetic

  • Non-toxic

  • Causes no respiratory problems

  • Antiseptic white paint finish

  • No powder residue

  • Bar Coded and Bi-lingual Labels

  • Wand provides greatest operator safety

  • Maximum visibility during discharge

  • No thermal or static shock

  • Minimal training

  • Most economical agent available

Wet-Chem Class "K" Kitchen Extinguishers
Back to Top
Features :
WET CHEMICAL extinguishers are the best restaurant kitchen
appliance hand portable fire extinguishers you can purchase. Both have been tested and approved for the new Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based, low PH agent developed for use in pre-engineered restaurant kitchen systems. The recent trend to more efficient cooking appliances and use of unsaturated cooking oils dictates the use of a hand portable fire extinguisher with greater fire fighting capacity and cooling effect to combat these very hot and difficult fires. Available in two sizes – 6 liter or 21⁄2 gal. with attractive stainless steel cylinders and easy to use hose and spray application nozzle. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no chemical residue to clean up. The Models B260 and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.
  • All Metal Valve Construction
  • Swivel connection on hose
  • Nozzle grip design with 45 degree angle
  • Low PH agent
  • Precise extinguishing agent application
  • Excellent for use on all cooking appliances
  • Tested on commercial deep fat fryers
  • Class 2A rated to meet fire code occupancy hazard requirements
  • Bar Coded and Bi-lingual Labels
Brackets
Back to Top
Features :
All Amerex brackets are quality manufactured of steel with a primed and powder coated paint finish. The paint finish assures many years of use and meets the latest U/L salt spray requirements (240 hrs. @ 20% salt solution – ASTM B117).

Vehicle Systems
Back to Top
Features :
 

 

Life Protector
Whether it is an operator sitting high atop a loader or your children riding in their school bus, Amerex Vehicle Fire Suppression Systems are designed first and foremost to protect human life. Our systems are designed and installed to suppress a fire before it can reach the operator or passenger areas quickly and efficiently.

 

 

Reduce Damage and Down Time
Industrial vehicles are plagued with potential fire hazards. Amerex can effectively identify these hazards and protect your equipment against them with a fixed fire suppression system. Amerex Vehicle Fire Suppression Systems are designed to warn the operator and suppress the fire, protecting both equipment and employees. Our automatic systems suppress the fire in its earliest stages before it becomes fully established and spreads into highly combustible areas. As a result, damage is limited and equipment down time is held to a minimum. Considering the protection provided, these systems are cost efficient. In fact, the cost of installing an Amerex system to protect your equipment can be compared to a penny protecting a ten-dollar bill.

 

Reduce Insurance Cost
Amerex Vehicle Fire Suppression Systems may make it easier to obtain insurance and also help you to qualify for lower premiums. As the costs of heavy-duty vehicles rise, insurance rates escalate accordingly. Many insurance companies have recognized a reduction in claims paid out due to the presence of a fixed vehicle fire suppression system. The Amerex Vehicle Fire Suppression System will lower your fire risk, which can lower your insurance premiums. The key phrase is “material change of risk.” Ask you insurance agent.

Amerex KP Systems
Back to Top
Features :
In either automatic or manual actuation the system works in this manner:

1. When a fire starts, the detection network, consisting of fusible links or pneumatic tubing, will automatically detect the fire or the manual pull station can be used, releasing a low pH agent throughout the hood, duct and onto the appliances.

2. Either method of actuation will interrupt gas or electrical power to the appliances preceding system discharge.

3. The Amerex KP agent quickly suppresses the fire and cools the fuel while securing the vapors with a smothering foam reaction.

The combination of the Amerex KP system and an Amerex Model B260 or B262 Wet Chemical extinguisher provides estaurants with a “ONE-TWO” attack against the threat of business loss due to cooking operation fires.

General Specifications:

The Amerex KP Restaurant System is a pre-engineered, wet chemical, stored-pressure type with a fixed nozzle agent distribution network. The system is listed by Underwriter’s Laboratories, Inc., ULC and tested to U.L. Standard 300. The system shall be designed, installed and maintained in accordance with: Amerex Part No. 12385 “Design, Installation and Maintenance Manual”, N.F.P.A. 96, N.F.P.A. 17A, local codes and ordinances by an Authorized Amerex KP Systems Distributor using factory trained personnel.

Carbon Dioxide Stored Pressure Extinguishers
Back to Top
Features :
In either automatic or manual actuation the system works in this manner:

1. When a fire starts, the detection network, consisting of fusible links or pneumatic tubing, will automatically detect the fire or the manual pull station can be used, releasing a low pH agent throughout the hood, duct and onto the appliances.

2. Either method of actuation will interrupt gas or electrical power to the appliances preceding system discharge.

3. The Amerex KP agent quickly suppresses the fire and cools the fuel while securing the vapors with a smothering foam reaction.

The combination of the Amerex KP system and an Amerex Model B260 or B262 Wet Chemical extinguisher provides estaurants with a “ONE-TWO” attack against the threat of business loss due to cooking operation fires.

General Specifications:

The Amerex KP Restaurant System is a pre-engineered, wet chemical, stored-pressure type with a fixed nozzle agent distribution network. The system is listed by Underwriter’s Laboratories, Inc., ULC and tested to U.L. Standard 300. The system shall be designed, installed and maintained in accordance with: Amerex Part No. 12385 “Design, Installation and Maintenance Manual”, N.F.P.A. 96, N.F.P.A. 17A, local codes and ordinances by an Authorized Amerex KP Systems Distributor using factory trained personnel.

PRM Pneumatic Release Module
Back to Top
Features :

Simple, Fast Installation and Maintenance

  • No corner pulleys

  • No cable

  • No crimps

  • Tubing simply snaps into clips anchored every 18 inches

  • No cutting and measuring of conduit within the hazard area

  • No tension to “set”

  • Tubing may be cut to length (no splices allowed)

  • 3 year tubing replacement requirement

  • Pressurized with compressed air (70 PSI) through standard air valve - no special tools

  • Testing accomplished by simply de-pressurizing the tubing

  • Easy to clean during 6 month maintenance

  • Accumulator pressure gauge can be viewed through window on PRM cover

Better Fire Detection

  • Entire tubing run works as a detector

  • In commercial kitchens, entire hood is covered with a single device

  • No need to change detector locations if appliances change

  • UL Listed for 435 degree (F) temperature response

  • Responds to actual fire as a “quick response” device

  • Safe for use in Hazardous locations

Rugged, Durable and Reliable

  • Impervious to hood cleaning chemicals, pressure washers

  • Years of extensive testing conducted

  • *Patent Pending
Zone Defense
Back to Top
Features :
Model 250CG AFFF Foam Extinguisher For use on Class A (ordinary combustibles) and B (Flammable liquid) fires. Features an easy and effective application using the hose and air aspirating nozzle. Has a unique capability to apply to flammable liquid spills to prevent ignition. Provides exceptional knock down and penetrating ability for use on deep seated Class A fires. Easier clean-up when compared with traditional dry chemical agents. Painted red and is U.S.C.G. approved when mounted using the 810CG bracket. Chrome plated brass valve body with stainless steel cylinder and handles offers superior corrosion protection when compared with most aluminum or standard mild steel cylinder extinguishers. Large diameter pull pin can be easily operated with gloves on. Schraeder valve on valve body allows for remote filling and charging with compressed air or nitrogen when using the Amerex 502 charge and potable water. Meets U.S.C.G. requirements for “Type A”, “Size II” and “Type B”, “Size II” extinguishers.
  • All Metal Valve Construction
  • Leaves no powder residue
  • Maximum visibility during discharge
  • Novice friendly, easy to understand instructions
  • Bar Coded Labels
Industrial Systems
Back to Top
Features :
The best Fire Extinguisher agent available
The Amerex “IS” system uses our exclusive ABC (Model 555) dry chemical. ABC dry chemical suppresses more fire, by volume, than any other agent. ABC dry chemical has quick flame “knock-down” and can help to secure Class A fires against re-ignition. Since many hazards involve a variety of fuel sources, our ABC dry chemical, with protection against Class A (wood, paper, pulp), Class B (flammable liquids) and Class C (live electrical equipment) is the agent that is best suited for most Industrial hazards.

Always ready when you need it
The Amerex “IS” industrial system incorporates an automatic detection system that will operate in case of a fire anytime, 24/7, even if no one is present. As with the rest of the “IS” system design and philosophy, the automatic fire detection system uses fewer components which saves on installation and maintenance costs.

Fewer Cylinders, Fewer Nozzles, Less Pipe
The Amerex “IS” industrial system uses fewer nozzles, including a unique “3-way” nozzle that eliminates the need for two separate nozzles for many situations. In some cases this may even eliminate an extra agent cylinder!

Amerex “IS” exclusives:
“Over-size” Paint Spray Booths – The Amerex “IS” has the first UL Listing allowing nozzles to be placed up to 23’-4” above the floor – now you can protect large vehicle paint spray booths that are used for trucks and heavy equipment with a fully UL Listed system that has been specifically tested using live fires for this application.

First Industrial system to be listed by UL under the newest edition of test Standard 1254 for nozzle heights up to 23’-4”above the floor – excellent for covering truck and heavy equipment spray booths.

Nozzles may be placed down the center of a standard sized booth to make filter replacement easy.

“Standard-sized Down Draft” Booths using the ceiling as a plenum – The Amerex “IS” system has unique UL Listings that allow for options regarding the placement of nozzles. Nozzles may be placed in the traditional “H” pattern or they may be placed “Inline” down the center of the ceiling or even at the side walls. This allows nozzles to be placed out of the way for periodic replacement of the filters saving you time, money and hassle.

“New Coverage” for paint spray booths -
The Amerex “IS” System has a new nozzle, the TFP (Total Flooding Perimeter) nozzle. A single IS45 cylinder using two TFP nozzles will cover 30% more volume – 5,440 cu. ft. – compared to the standard coverage using four TF nozzles. Locating the TFP nozzles on the perimeter saves on system components, number of cylinders and piping. Nozzle location will be easier while a typical system installation will require less equipment and less installation time.
Clean Agent System w/ FM200
Back to Top
Features :

Utilizing the industry recognized FM-200 suppression agent, Amerex has developed an affordable pre-engineered clean agent fire suppression system to protect areas with sensitive electrical equipment and valuable data. As an industry leader in innovative design of products that provide the quality and performance you expect, Amerex has developed the CPS system to be the most cost efficient clean agent system available. The modular design incorporates pre-assembled wiring harnesses and keyed locking connectors on all electrical components to assist you in a simple and confident installation. Agent tanks are available in two sizes having a diameter of ten inches making tank location in confined spaces less stressful. Tanks are charged with FM-200 in increments of two pounds in a small tank or three pounds in a larger tank for a custom installation without un-necessary expense. Electrical actuators are used for system actuation and can be reset reducing the number of components to be replaced during service after discharge. The CPS system is designed to use schedule 40 pipe giving you easy access to the materials you need to complete the installation. Nozzles are available in three designs; corner, side wall, and center room for flexibility in system installation to protect those “challenging” areas. The Amerex CPS is monitored by an electrical control panel that has a battery back-up for 24 hour protection during power failure. Photoelectric smoke detectors are used for detection and are cross zoned to reduce the potential for unwanted system discharge. A bell and hornstrobe device alarm when fi re conditions are present. All electrical circuits are supervised and factory terminated.

Getz Manufacturing Recharge Equipment
Back to Top
Features :

Getz Manufacturing was founded in 1971. We have been providing quality, innovative, and environmentally friendly equipment designed primarily for the servicing of portable fire extinguishers for the past 27 years.

The servicing of fire protection equipment is a labor intensive business. Profit in the servicing business lies in efficiency, and efficiency requires the correct equipment. Getz Manufacturing provides that equipment.

At Getz Manufacturing pollution and dust control are essential elements of our product designs. Sophisticated control of quality insures you of receiving the finest equipment in the industry. Careful inspection of all incoming materials and careful control of all manufacturing processes guarantee maximum performance. This combination of environmental concern, quality equipment, and servicing experience can provide you with the tools you need to service your clients efficiently, profitably and safely. Getz Manufacturing knows the service business and can help you in customizing your shop and your vehicles for efficiency and profit.

AMGADS Mobile Gas Detection System
Back to Top
Features :
AMGADS III (Amerex Mobile Gas Detection System – 3rd Generation) gas monitoring system is a pre-engineered system designed to be utilized on any type of alternately fueled vehicle. The system can be installed by the vehicle OEM or retrofitted. Its advanced technology can detect: Compressed Natural Gas (CNG), Liquified Natural Gas (LNG), Propane (LPG), Hydrogen and any other hydrocarbon fuel vapors.
Model 600 Halon Wheeled
Back to Top
Features :
Brass, chrome plated operating valve
  • 200 PSI Operating Pressure
  • Heavy duty steel cylinder, carriage and hose hanger assembly
  • Quick release 50 ft. discharge hose with brass/chrome plated ball type shut-off nozzle
  • Pressure gauge protected by a stainless steel gauge guard
  • Corrosion resistant lime/yellow polyurethane paint finish
  • Large color coded mylar instruction labels
  • Operating temperature range: -65 to +120 F
Small Business System
Back to Top
Features :

Amerex has once again revolutionalized the industry with the developement of a cost effecient fire suppression system specifically designed for small – front engine transit vehicles. The Amerex Small Vehicle System (SMVS) is designed specifically for use with front engine vehicles such as Para-Transit, Airport Shuttle and other small front engine applications. The SMVS kit includes all hardware components required for a complete turn-key Automatic Fire Suppression System. The electronics portion of the system is made up of a Vehicle Operator Display with Manual Release Pushbutton, a wiring Interface Module, and two Solid State Heat Detectors. The system is continuously supervised for proper operation. If a trouble condition is present, the Operator Display indicates a diagnostic Service System LED. In the event of a Fire condition, Automatic Fire System actuation occurs, an audible alarm sounds, a Fire LED illuminates and an internal relay is energized. The Control Panel features visual LED system status indicators, a silenceable audible alarm. Backup power is supplied by a standard 9 volt alkaline battery. The Fire Suppression System is FM approved. The electronics also carry CE Type approval.

Every product we manufacture is designed with you in mind. The Amerex SMVS system is simple to install, is low mainte-
nance, and has a user friendly interface. With the quality you expect from Amerex products, our expert staff of engineers have designed the ultimate in fire suppression for small transit vehicles.

Application:
  • Para-Transit Vehicles
  • Medical, Fire and Rescue Vehicles
  • Armoured Transit Vehicles
  • Parcel Delivery Vehicles
  • Rental Transport Vehicles
  • Shuttle Mini-Bus, Van
  • Vending Delivery Vehicles
  • Cut-A-Way Van
  • Other Front Engine Vehicle Applications
Benefits:
  • Provides Low Cost Fire Detection and Suppression for Front Engine Vehicles
  • Supervised Circuitry with Zoned LED Alarm Circuitry
  • Provides Fire Suppression Capabilities from -40°F to +150°F
  • Cylinder is Non-Rechargable (discard after any use)
  • One (1) Year Warranty On All Components
  • Latching-Zoned Alarm Indication
  • Push-To-Test Function
System Includes:
  • Charged Cylinder
  • Cylinder Bracket
  • Nozzle/detector Bracket
  • Pre-Cut hose
  • Fire Control Panel
  • Display Panel
  • Communication Cable
  • Heat Detectors
  • Nozzles
  • Mounting Hardware
  • * Components may vary depending on vehicle
Halotron I FAA Approved
Back to Top
Features :
  • All Metal Construction
  • EPA Approved "Clean Agent"
  • Most widely used Halon 1211 replacement agent
  • Can be used for full training programs
  • Double-Strap mounting bracket
Accessories  |  Blowers  |  Boots  |  Bunker Gear  |  Combination Tools  |  Communication Equipment  |  Coveralls & Flight Suits  |  Extrication Tools  |  Fire Extinguishers  |  Fire Hose  |  Foam & Foam Systems  |  Lifting Bags  |  Power Units Rope Rescue System  |  Saws  |  Tychem Products

GSA CONTRACT #GS-07F-0424M
Total Solutions for Law Enforcement, Security, Facility Management Systems, Fire, Rescue, Special Purpose Clothing, Marine Craft and Emergency/Disaster Responses

CCR Registered: Yes
CAGE: 1X6B6
TIN: 23-310-2296
DUNS: 107966017
PERIOD: Aug 1, 2007 through July 31 2012

 Contractor
911 Safety Equipment, LLC
329 East Main Street, Norristown, PA. 19401
Phone: (610) 279-6808 Fax: (610) 279-6806

Special Item Numbers (SIN’s)
     246-20(2)    465-11    465-19    465-22    567-99    633-30    633-30a